طريقة اخذ وتسجيل بيانات القادوس , قواديس السواقى وبياناتها

يضم كل ما يتعلق بالنقل ووسائله داخل المطحن (بريمة ، ساقية ، كاتينه - بنيوماتيك "هواء")
أضف رد جديد
Osama Badr
مؤسس المنتدى
مشاركات: 8630
اشترك في: الخميس مايو 03, 2018 2:46 pm
اتصال:

طريقة اخذ وتسجيل بيانات القادوس , قواديس السواقى وبياناتها

مشاركة بواسطة Osama Badr »



طريقة اخذ وتسجيل بيانات القادوس
قواديس السواقى وبياناتها

صورة
تسجيل هذه البيانات له فائده واهمية فى معرفة حجم القادوس وكم يسع من الكمية المنقولة باختلاق الوزن النوعى للمواد المنقوله .
Buckets should be measured on the outside:
جميع القياسات تتم من الخارج

A - Length also known as Width « الطول=العرض
Using a straight line, measure the distance across the back of the bucket.

B - Projection « قياس الفتحة بين شفتى القادوس
the most commonly mismeasured dimension. The easiest way to measure projection is from the bolt line in back of bucket to front lip. Be sure to allow for thickness of back of bucket.

C -Depth (height « الارتفاع=العمق
Using a straight line down the side of the bucket, measure the top of the back to the bottom of the bucket.

D - Front Angel الزاوية الامامية
Angle is measured from the horizontal, back up to the front of the bucket
مدونة تكنولوجيا الطحن Millingtec
https://millingtec.blogspot.com
-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-
مدونة اعمل صالحا DOSALEH
https://dosaleh.blogspot.com
-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-
قناة زدنى علما zdny3lma
https://www.youtube.com/@zdny3lma
Knowledge is a power
Keep on what you're reading of HOLY QURAN
There is much still to learn
أضف رد جديد

العودة إلى ”النواقل بالمطحن (بريمة ، ساقية ، كاتينه - بنيوماتيك"هواء")“