Wheat meal and flour من القمح الى الدقيق

يضم ما يخص جودة القمح - جودة الدقيق - جودة السميد - جودة الردة الخشنة - جودة الردة الناعمة - جودة السنون من تحليلات واختبارت جودة القمح - Wheat Quality والمنتجات من دقيق و سيمولينا "سميد" و ردة خشنة وناعمة وسنون وجنين و مواصفات الدقيق المناسب للصناعات المختلفة ، كل ما يخص اساليب ضبط الجودة من اختبارات وتحاليل وتحقيق مواصفات وما يتعلق بنظم توكيد الجودة و شهادات الجودة & الاختبارات والاجهزة المعملية وقيمها ودلالتها - Laboratory Instruments ويضم الاختبارات والتعاريف والمانيوال الخاصة بالاجهزة المستخدمة فى المعامل وقيمها ودلالتها
Osama Badr
مؤسس المنتدى
مشاركات: 8628
اشترك في: الخميس مايو 03, 2018 2:46 pm
اتصال:

Re: Wheat meal and flour من القمح الى الدقيق

مشاركة بواسطة Osama Badr »



Milling/ grinding phase
In this phase the endosperm is first divided into two groups: coarse and fine grinding. The coarse grind (middlings, groat) is finely rolled using up to 12 consecutive smooth rolls. After every rolling step, the whole is sieved, creating different fractions.

The fine grinding, which consists of lumps of endosperm and flour, is cleaned in the middlings purifier. After brushing, the semolina (finest parts) are also milled. The middlings go with the bran to a dissolution roll. Here, the bran is separated from the endosperm.

The wheat grains have now completed a large number of rolling steps. The three streams that ultimately result from the milling process are the bran and the germ, the flour and the meal with small parts of bran and germ. The size of these fractions are dependent on the type of meal or flour. The whitest flour results from the first scrap and milling rolling.

كود: تحديد الكل

Milling/ grinding phase
In this phase the endosperm is first divided into two groups: coarse and fine grinding. The coarse grind (middlings, groat) is finely rolled using up to 12 consecutive smooth rolls. After every rolling step, the whole is sieved, creating different fractions.

The fine grinding, which consists of lumps of endosperm and flour, is cleaned in the middlings purifier. After brushing, the semolina (finest parts) are also milled. The middlings go with the bran to a dissolution roll. Here, the bran is separated from the endosperm.

The wheat grains have now completed a large number of rolling steps. The three streams that ultimately result from the milling process are the bran and the germ, the flour and the meal with small parts of bran and germ. The size of these fractions are dependent on the type of meal or flour. The whitest flour results from the first scrap and milling rolling.
مدونة تكنولوجيا الطحن Millingtec
https://millingtec.blogspot.com
-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-
مدونة اعمل صالحا DOSALEH
https://dosaleh.blogspot.com
-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-
قناة زدنى علما zdny3lma
https://www.youtube.com/@zdny3lma
Knowledge is a power
Keep on what you're reading of HOLY QURAN
There is much still to learn
Osama Badr
مؤسس المنتدى
مشاركات: 8628
اشترك في: الخميس مايو 03, 2018 2:46 pm
اتصال:

Re: Wheat meal and flour من القمح الى الدقيق

مشاركة بواسطة Osama Badr »



Packing
Before the flour is packaged, it is occasionally bleached some more or enriched with vitamins and minerals during the refining step of the production. In general, the different types of meal and flour are delivered in bulk. In addition, approximately one-fourth is packaged in bulk packs and 5% in small packages.

كود: تحديد الكل

Packing
Before the flour is packaged, it is occasionally bleached some more or enriched with vitamins and minerals during the refining step of the production. In general, the different types of meal and flour are delivered in bulk. In addition, approximately one-fourth is packaged in bulk packs and 5% in small packages.
مدونة تكنولوجيا الطحن Millingtec
https://millingtec.blogspot.com
-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-
مدونة اعمل صالحا DOSALEH
https://dosaleh.blogspot.com
-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-
قناة زدنى علما zdny3lma
https://www.youtube.com/@zdny3lma
Knowledge is a power
Keep on what you're reading of HOLY QURAN
There is much still to learn
Osama Badr
مؤسس المنتدى
مشاركات: 8628
اشترك في: الخميس مايو 03, 2018 2:46 pm
اتصال:

Re: Wheat meal and flour من القمح الى الدقيق

مشاركة بواسطة Osama Badr »



Food Safety & Hygienic Design
The general rule is, that as long as the product produced is a dry food, each machine design is sufficient, as long as no physical or chemical lubricants are used, and there is no transfer of allergens. This rule applies to the entire production process. From grain to flour, this means a moisture content of 11-16% should be maintained. This rule only applies as long as the machines are only dry-cleaned, and no water is used, and no condensation occurs.

However, the moisture in grain is not evenly distributed. Increased moisture on the outside, can still lead to mold growth, the system must therefore be visually clean. No old product can remain - even though the meal or flour is baked later. There is a high probability that certain fungi will produce heat-stable toxins. Moreover, meal and flour are also used for decoration and are sprinkled on freshly baked bread.

The conditioning step is the critical stage in the production process, due to the use of a relatively large amount of water. This section should therefore be hygienically designed.

For the remaining equipment a GMP design is sufficient, that is, if the equipment is easily accessible and dry cleanable. A thin layer of residual product should not pose a problem, as long as no significant amounts of leftover product stick somewhere in places where condense could be formed.

كود: تحديد الكل

Food Safety & Hygienic Design
The general rule is, that as long as the product produced is a dry food, each machine design is sufficient, as long as no physical or chemical lubricants are used, and there is no transfer of allergens. This rule applies to the entire production process. From grain to flour, this means a moisture content of 11-16% should be maintained. This rule only applies as long as the machines are only dry-cleaned, and no water is used, and no condensation occurs.

However, the moisture in grain is not evenly distributed. Increased moisture on the outside, can still lead to mold growth, the system must therefore be visually clean. No old product can remain - even though the meal or flour is baked later. There is a high probability that certain fungi will produce heat-stable toxins. Moreover, meal and flour are also used for decoration and are sprinkled on freshly baked bread.

The conditioning step is the critical stage in the production process, due to the use of a relatively large amount of water. This section should therefore be hygienically designed.

For the remaining equipment a GMP design is sufficient, that is, if the equipment is easily accessible and dry cleanable. A thin layer of residual product should not pose a problem, as long as no significant amounts of leftover product stick somewhere in places where condense could be formed.
مدونة تكنولوجيا الطحن Millingtec
https://millingtec.blogspot.com
-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-
مدونة اعمل صالحا DOSALEH
https://dosaleh.blogspot.com
-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-٠-
قناة زدنى علما zdny3lma
https://www.youtube.com/@zdny3lma
Knowledge is a power
Keep on what you're reading of HOLY QURAN
There is much still to learn
أضف رد جديد

العودة إلى ”جودة القمح و منتجاته - جودة الدقيق ومواصفات الدقيق المناسب لكل صناعة و الاختبارات والتحليلات المعملية - wheat and its products Quality ، Flour and Purposes“